| BETONSPAN 330, melamine-coated moisture resistant board (MUF, Extra-WR) |
|
| Quality: |
High-density chipboard with aminoplast film 330 g/m² and particularly screw- |
|
tight core. Reference EN 312 P5, EN test standards 310, 317, 319, 321 |
| Size: |
2030 x 5230 mm |
| Thickness: |
21 mm |
| Glue bond: |
MUF |
| Technical Data of Manufacturer |
| General characteristics + standard |
Unit |
Average values |
| Thickness EN 324-1 |
mm |
21 |
| Density EN 323 |
Kg/m³ |
740 |
| Moisture content EN 322 |
% |
6 – 10 |
Technical porperties of 18 mm and 22 mm
|
5/95 Percentile Values |
| Bending strength EN 310 |
N/mm² |
20 |
| Internal bond EN 319 |
N/mm² |
0.7 |
| MOE bending EN 310 |
N/mm² |
3200 |
| Swelling/24 h EN 317 |
% |
10 |
| The board meets the specifications of EN 312 – P5 – option 1 – cyclic test, in which the board is immersed in water, frozen and finally dried. This cycle is repeated three times, after which the test specimens are tested for swelling and internal bond strength. The board is CE marked and checked daily by the in-house lab. |
| Make sure the Betonspan panel is supported correctly to prevent significant deflection. Avoid direct water contact at the edges, wherever possible. Freshly cut edges shall be sealed with waterproof paint. Use suitable sawing, milling and drilling tools. Betonspan cannot be used in a service class 3 environment in case of permanent installation like a building’s facade. |
| Isoplyform |
| Quality/grade: |
Fully laid-up of rotary-cut/peeled veneers of either Beech of 1.6 mm thickness or Birch of 1.4 mm thickness. The overlay consists of 1.6 mm thick, grey coloured, modified propylene sheets. |
| Sizes: |
1350/1500 mm x 2700 mm und 1250/1500 mm x 2500 mm |
| Nominal thickness (mm) |
12 |
15 |
18 |
21 |
24 |
| Effective thickness (mm) |
12 ± 0.3 |
15 ± 0.4 |
18 ± 0.4 |
20.7 ± 0.4 |
23.8 ± 0.4 |
| Sheets per unit |
50 |
40 |
35 |
30 |
25 |
| Lay-up: The base panel is conventional, cross-wise laminated veneer plywood. The water-repellent overlay represents 3.2 mm of the panel thickness. The overlay material is fully recyclable, plain polypropylene, without any portion of cellulose or kraft-paper. This accounts for the low water absorption of maximum 1.8 %. Its Hardness is Shore D 75 – 80. Special sizes of up-to 1500 mm x 4000 mm and 2000 mm x 3000 mm, cut-to-size, custom overlay thickness and colour are available upon request. |
|
| Birch, smooth overlay both sides |
| Quality/grade: |
both sides Phenolic resin overlay of 120 g/m² |
| Size: |
1500 mm x 3000 mm |
| Glue bond: |
BFU 100 / WBP / EN 314-2 |
| Thickness (mm): |
6.5 |
9 |
12 |
15 |
18 |
21 |
|
|
|
|
| Plies: |
5 |
7 |
9 |
11 |
13 |
15 |
|
|
|
|
| Sheets per unit: |
90 |
65 |
50 |
40 |
35 |
30 |
|
|
|
|
| Additional sizes available up-on request. |
|
|
|
|
|
|
|
|
|
|
|
| Asian Plywood, smooth overlay both sides |
| Quality/grade: |
both sides Phenolic resin overlay of 167 g/m² |
| Size: |
2500 mm x 1250 mm, thickness 21 mm also 1500 mm x 3000/3600 mm |
| Glue bond: |
WBP |
| Thickness (mm): |
4 |
8 |
12 |
15 |
18 |
21 |
|
|
|
|
| Plies: |
3 |
5 |
5 |
7 |
7 |
9/11 |
|
|
|
|
| Sheets per unit: |
* |
* |
* |
* |
* |
* |
|
|
|
|
| Additional sizes and thickness available up-on request. *Number of sSheets per unit varies depending on manufacturer. |
|
|
|
